Considerations for Fabrication of CAD-CAM Abutments: Part I. Selection of Titanium Block and Fabrication Process

Kyung-Ho Ko; Jong-Hyun Park; Lee-Ra Cho

doi:10.32542/implantology.2019005

All Issue

2019 Vol.23, Issue 1 Preview Page

Review Article

Considerations for Fabrication of CAD-CAM Abutments: Part I. Selection of Titanium Block and Fabrication Process CAD-CAM 맞춤 지대주 제작 시 고려사항: I. 환봉선택 및 제작과정을 중심으로

30 March 2019. pp. 46-58

PDF XML

Abstract

Custom abutment fabrication using computer aided design–computer aided manufacturing (CAD-CAM) technology is an efficient method that can be used to overcome complications associated with tilted implant installation and esthetics. This technology is becoming increasingly popular due to its convenience. However, CAD-CAM abutments are often misused because many clinicians did not consider the various factors involved in their use. Herein, we investigate the factors that must be considered during the fabrication of CAD-CAM abutments, problems using compatible abutments.

Keywords

CAD-CAM abutment

Compatible abutment

Implant-abutment assembly

Titanium block

References

Marlin GM, Baraban D. Restoring the single lower incisor implant with esthetics, antirotation, and retrievability. Compendium. 1994; 15: 624, 626, 628-629.

8055527

Marchack CB. A custom titanium abutment for the anterior single-tooth implant. J Prosthet Dent. 1996; 76: 288-291.

10.1016/S0022-3913(96)90173-0

de Avila ED, de Molon RS, de Barros-Filho LA, et al. Correction of malpositioned implants through periodontal surgery and prosthetic rehabilitation using angled abutment. Case Rep Dent. 2014; 2014: 702-630.

10.1155/2014/702630

Linkevicius T, Apse P. Influence of abutment material on stability of peri-implant tissues: a systematic review. Int J Oral Maxillofac Implants. 2008; 23: 449-456.

18700367

Welander M, Abrahamsson I, Berglundh T. The mucosal barrier at implant abutments of different materials. Clin Oral Implants Res. 2008; 19: 635-641.

18492075

Lee JS, Lee JS. Effect of various abutment systems on the removal torque and the abutment settling in the conical connection implant systems. J Korean Acad Prosthodont. 2012; 50: 92-98.

10.4047/jkap.2012.50.2.92

Lee JH, Kim DG, Park CJ, et al. Axial displacements in external and internal implant-abutment connection. Clin Oral Implants Res. 2014; 25: e83-e89.

10.1111/clr.1206223088616

Huh YH, Ko KH, Park CJ, et al. Axial displacement in cement-retained prostheses with different implant-abutment connections. Int J Oral Maxillofac Implants. In press. 2017; 28(Suppl.14).

Gehrke P, Tabellion A, Fischer C. Microscopical and chemical surface characterization of CAD/CAM zirconia abutment after different cleaning procedures. A qualitative analysis. J Adv Prosthodont. 2015; 7: 151-159.

10.4047/jap.2015.7.2.15125932314PMC4414946

Canullo L, Micarelli C, Lembo-Fazio L, et al. Microscopical and microbiologic characterization of customized titanium abutments. Clin Oral Implants Res. 2014; 25: 328-336.

10.1111/clr.1208923210704

Lee JH, Huh YH, Park CJ, et al. Effect of the coronal wall thickness of dental Implants on the screw joint stability in the internal Implant-abutment connection. Int J Oral Maxillofac Implants. 2016; 31: 1058-1065.

10.11607/jomi.460027632260

Lee JH, Lee W, Huh YH, et al. Impact of intentional overload on joint stability of internal Implant-abutment connection system with different diameter. J Prosthodont. 2017 Sep 5. doi: 10.1111/jopr.12661.

10.1111/jopr.12661

Cho SY, Huh YH, Park CJ, et al. Three-dimensional finite element analysis of the stress distribution at the internal Implant-abutment connection. Int J Periodontics Restorative Dent. 2016; 36: e49-e58.

10.11607/prd.235127100815

Choi HS. The study for abutmet- compatibility of implant systems. J Dental Impl Res. 2008; 2: 53-62.

Kim JW, Heo YR, Kim HJ, et al. A comparative study on the fit and screw joint stability of ready-made abutment and CAD-CAM custom-made abutment. J Korean Acad Prosthodont. 2013; 51: 276-283.

10.4047/jkap.2013.51.4.276

Cochran DL, Bosshardt DD, Grize L, et al. Bone response to loaded implants with non-matching implant-abutment diameters in the canine mandible. J Periodontol. 2009; 80: 609-617.

10.1902/jop.2009.08032319335081

Information

Publisher :The Korean Academy of Oral & Maxillofacial Implantology
Publisher(Ko) :대한구강악안면임플란트학회
Journal Title :Implantology
Journal Title(Ko) :대한구강악안면임플란트학회지
Volume : 23
No :1
Pages :46-58
Received Date : 2019-01-04
Revised Date : 2019-03-08
Accepted Date : 2019-03-12
DOI :https://doi.org/10.32542/implantology.2019005

Journal of implantology and applied sciences ISSN:2765-7833(Print) 2765-7841(Online) 대한구강악안면임플란트학회지

All Issue